Blog #7
Remote-Controlled Garden Seeder Team 31- Beyza Kural, Syed Hussain, Nawaf Abulhaija Progress Update 03/09/2024 - 03/23/2024 For the work period of March 9-March 23, the team has begun fabricating the main frame of the device which will house all the electrical components and be used as the body of the device. The team began the work period by first constructing the main frame of the body to take essential measurements of any component that may need to be cut or resized after assembly. This initial step can be seen in Figure 1 below and depicts the initial assembly before measurements were taken to precisely cut the metal. Figure 1 : Assembly before cuts. The axle on the right drive-end of the device protrudes out too far to where the motor is not sitting on the right-side frame as it is on the left side. The device was also too long, and it was determined that there was a lot of unnecessary space in between the rear and front tires. The team decided to short